Latest Discussions : Flooring & Stairs


03:43PM | 09/12/05
Member Since: 07/16/05
7 lifetime posts
I am almost finished with my installation, but I need to make rectangular shaped cuts around three metal sliding door "supports" that come down to the subfloor; and as luck would have it, the cuts need to be made in the middle of the length of each tile (not on the corners). The cuts will be 3/4" deep by 2" wide and 1" deep by 3" wide. I have a wet saw, but with my experience cutting the straight edges, I know that I will inevitably break the tiles when I make the deep cuts and then how do I make the wide ones? Will nippers do the trick on porcelain floor tile or is there another way?


07:31AM | 10/18/06
Member Since: 10/17/06
1 lifetime posts
When I click to open the thread, nothing happens. I just end up at the same screen I started with and a messege that says I'm already watching the thread.

Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button


Post new button or Login button