Latest Discussions : Flooring & Stairs

BV003556

03:29PM | 03/15/14
I cleaned old wood floor with mineral spirits three days ago after I sanded the floor. Yesterday I applied a product by Sico called crystallex. The room is below 50 degrees. Today the Sico did not adhere in some spots. I tried to sand lightly it came off the floor. I used 180 grit on a sanding pole. Is it possible that the floor did not adhere in some places from the mineral spirits not being dry enough and it being quite cold in there. Do I need to resand and wait till it is warmer or could there be some other problem....thank you for your time......Jim parsons



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button

Anonymous

Post new button or Login button
Register