Garage door motor
ET garage motor. It was taken out and stored in a storage and after the renovations on the house was done the garage doors and motors was returned and re installed. It worked fine for 3 weeks. The people that did the corners said he put the door on manual and pulled the door colsed and the garage moter made boom. The Electrical people was there and the wires they pulled through was in a empty pype and that wires was not connected at the stage so there was no power on the cable.When the power was put back on the other garage motor did the same but the door still open and close but there is smoke comming out of the motor itself. When the electrician tested the plugs with a drill it worked fine and did not trip the power or nothing. What could have caused this.