I have a 5 year old Kenmore washer that has developed a problem during the agitation cycle.
When doing a load of clothes, the agitation cycle stopped, there was a slight smell of burnt plastic.
I was able to run the spin cycle to empty out the water.
When I tried to run the machine again, it filled just fine, however, when the agitator started it ran for only about a minute, then stopped.
I took out the agitator and the spline is not stripped.
Any thoughts?
If you post the machine's complete model number so we can look up what design it is, someone may be able to make a suggestion.
You can find tips for locating the model and serial number tag on your appliances in the 'Repair Parts' section of my web site linked below.
Dan O.
www.Appliance411.com/parts/?ref411=Kenmore+Washer
The Appliance Information Site
=D~~~~~~
You can find tips for locating the model and serial number tag on your appliances in the 'Repair Parts' section of my web site linked below.
Dan O.
www.Appliance411.com/parts/?ref411=Kenmore+Washer
The Appliance Information Site
=D~~~~~~
** I was able to run the spin cycle to empty out the water... When I tried to run the machine again, it filled just fine, however, when the agitator started it ran for only about a minute, then stopped. **
Will it still spin now?
Dan O.
www.Appliance411.com/parts/?ref411=Kenmore+Washer
The Appliance Information Site
=D~~~~~~
Will it still spin now?
Dan O.
www.Appliance411.com/parts/?ref411=Kenmore+Washer
The Appliance Information Site
=D~~~~~~
Post a reply as Anonymous
Related Discussions
washer problem
this is a kenmore top load washer. 110 92580100 the trouble i am having is when you close the lid you need to push down on it ...
2
answers
about 11 years by LarryG
Washer problem
My washer is not agitating or spinning and I feel it is probably a belt or something slipped off.How do you get into these new washe...
1
answersover 17 years by DanO
no agitation
Hi, I have a sears Kenmore washing machine model # 110 92599200 and the serial # is CF1506125. It just stopped do agitation. The bot...
1
answersover 11 years by DanO
GE Profile Washer Labors During Agitation Cycle
My topload washer acts as if something is loading it down during the agitation cycle. This only happens when set to the Slow(Gentle...
0
answersalmost 15 years by jsanta
