Latest Discussions : Electrical & Lighting

catsfordays

08:45PM | 06/05/08
Member Since: 06/05/08
1 lifetime posts
My washer drains about 2 inchs worth of water and I can hear the pump working fine. It will spin off some water but leaves most in the basket. I think the pump is clossed or impeller is stuck due to "junk" from the wash. I run an animal rescue so after 3 years of washing furry beds I think the thing is plugged. I have taken the front off but don't know how to take the pump off to clear it if that is the case. Need schematics and advice!!!

Thanks

Suzanne

CATMANDOO RESCUE

catmandoo rescue

appliguy

04:43AM | 06/06/08
Member Since: 07/23/04
491 lifetime posts
Hi,

110. is the beginning of a model#.

**It will spin off some water but leaves most in the basket**

The motor runs through the whole drain/spin mode?

Something between the tanks ( clothing, coin, ect ), clogged hose, broken pump, kinked hose might be suspects.

**I have taken the front off but don't know how to take the pump off to clear it if that is the case**

This is a common version of a direct drive washer...

http://www.applianceaid.com/procedures.html

jeff.

Appliance Repair Aid

http://www.applianceaid.com/

JRAppliance

http://www.jrappliance.ca


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button

Anonymous

Post new button or Login button
Register