Latest Discussions : Tools & Workshop

RedSwede

03:35AM | 10/09/04
Member Since: 10/08/04
1 lifetime posts
I have an old Craftsman 12" direct drive tablesaw (blade mounted on the motor) and need a manual. There is no indication of a model number anywhere other than on the motor. The motor model number is KK48BB-107 and its part number is 62254 & mfg. number is J6990. The shaft is 5/8" and I haven't found 12" blades to fit. The saw is labeled as a 12" saw. ***** has been no help.

Red Swede

Colorado

carl21l

06:44AM | 10/11/04
Member Since: 03/21/04
171 lifetime posts
go to a large hardware store and ask for arbor bushings. you should be able to get a bushing that will convert the 1" hole in the blade to 5/9". I was able to get 1/2" to 5/8" bushings at a large Ace hardware and they had many different sizes in stock there.

JMHO

Carl

carl21l

01:17PM | 10/11/04
Member Since: 03/21/04
171 lifetime posts
I was just putting away some of my blades that had been to the sharpener and found that one of the DeWalt 12" blades has a 5/8' adapter in it.

Carl

BV018784

02:53PM | 02/28/19
For a manual: check out
http://vintagemachinery.org/pubs/detail.aspx?id=4364



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button

Anonymous

Post new button or Login button
Register