07:04AM | 09/24/08
Member Since: 09/23/08
1 lifetime posts
Okay, we bought a new motion sensor flood light to replace one that the motion sensor died on (really old), i thought no problem take one down, replace it, but the new one has very poor directions in that it says wire black to black and white to white and don't do anything with green or bare that is ground. HOWEVER the problem comes with the fixture itself has black and white wires but also a red wire, with no indication in the instructions as to what that is. Also does not tell me to connect the ground to anything, a grounding screw, etc, just tells me to leave it loose in the box?? Also on white and black wires have multiple ones in the fixture, one to each of two flood lights and one to the sensor, do they all connect together and to the one white coming from the box? same for black? shows on instructions that the fixture has 1 black wire and 1 white which is not the case. Also no help line listed, very very very poor instructions. Thanks for any help.


03:22PM | 09/24/08
Member Since: 01/09/07
198 lifetime posts
These do indeed sound like VERY bad instructions!

First, the ground wires should ALWAYS be connected. If it's a metal box, you should have a grounding screw with a pigtail wire that you can connect to the other grounding wires. If it's a plastic box, just connect all the grounding wires together, including the one from the incoming power cable.

And all the white wires get connected together.

Probably, the black power wire from the box connects to a wire to the sensor, and the other wire coming out from the sensor then connects to the two black wires going to the two lights in the fixture. Whether the black power wire connects to the red sensor wire, and then the black wire from the sensor connects to the blacks from the lights, or vice versa, will depend on the specific manufacturer and their instructions (which seem to be bad in your case). It may not matter; it might work either way. First, try searching online for that specific manufacturer and model, and maybe find better instructions. But if you can't you might just have to experiment. (You risk damaging the sensor, but there should not be any risk of fire or other electrical problems.)


05:54PM | 09/25/08
Member Since: 09/24/08
10 lifetime posts

look at the above link and it explains how ot wire and tells you about the red wire. (red motion-sensor wire)

hope it helps!

Click to reply button
Inspiration banner


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button


Post new button or Login button

To test the boundaries of small-footprint living, interior designer Jessica Helgerson moved her family to a 540-square-foo... Filling an underutilized area beneath the stairs is a smart way to save space. Doing so with a stash of wood, however, is ... The Audubon Society inspired wallpaper in this Adirondack-styled mudroom will get you in the outdoor mood. Grab your coat ... Chalkboard paint opens up endless possibilities for customizing your dresser time and time again. Use chalk to label the c... A fireplace in the bathroom creates the ultimate setting for relaxation. Homeowners often choose electric or gas over wood... This roomy boot tray made from punched metal stands up to all the elements. Station it in your mudroom or at your back doo... There’s nothing like a new set of cabinet hardware to refresh a room. The possibilities are endless: Go modern, rustic, or... FLOR tiles are an affordable way to customize a carpeted floor covering for any space. Make anything from runners to wall-... Chalkboard paint features prominently in this elegant yet unpretentious headboard design. Add a new message daily to reflec... Salvaged boards in varying widths and colors make up the dramatic accent wall in this attic space. The high-gloss white of... The indecisive homeowner need not fret over choosing one (or even two) cabinet colors. The kitchen cabinets in this artist... Incorporate nature into your lighting scheme by securing a dead tree in a concrete mold and draping your pendant lamp from... Simple and striking, a couple of pieces of "lovingly used" furniture creates a special kind of charm. A weathered chair fo... First dress up your metal shelves with a coat of paint in an accent color that complements your kitchen decor. Then arrang... Dark wood shelving and a matching upholstered bench keep this closet sleek and refined. The large window brightens the sub...
Follow banner a
Newsletter icon Flipboard glossy Facebook Twitter Pinterest Youtube Rss icon