I had put in an inline water filter a few years ago and have had no problems until the other day I noticed it was leaking. I turn the water off with the cutoff valve and had it off for a few days while I repared the leak. When I turned the water back on I noticed the sink and shower in the master bedroom had no water pressure. The toilet works fine. I am at a loss can someone please help.
COMMUNITY FORUM
1- The toilet unless it is a flushometer would work fine as the water in the tank is what makes it flush even if it does fill slowly
2- Have you made sure the valves you shut you opened completly?
3- If any sediment got into the domestic line then possibly you can back flush the water.
4- Some folks use a globe valve pattern on a domestic line forgetting the globe is for throttling and not designed for a main shut off.
If this is the case possibly the washer in side the globe became dislodged and is restricting the flow.
Personally I would double check to make sure all the valves are fully open and if they are either globe or gate then after opening fully give a 1/4 turn back so the valve stem doesnt become locked (binded)
2- Have you made sure the valves you shut you opened completly?
3- If any sediment got into the domestic line then possibly you can back flush the water.
4- Some folks use a globe valve pattern on a domestic line forgetting the globe is for throttling and not designed for a main shut off.
If this is the case possibly the washer in side the globe became dislodged and is restricting the flow.
Personally I would double check to make sure all the valves are fully open and if they are either globe or gate then after opening fully give a 1/4 turn back so the valve stem doesnt become locked (binded)
