07:24AM | 01/04/07
Member Since: 01/03/07
1 lifetime posts
I have a 5 gal. bucket of joint compound, bought this summer. I used about 10% of it on two small jobs in July and Sept (3-5 months ago), and the bucket has been stored in my basement. I opened it yesterday, and found fuzzy red mold growing all over it, with a good number of spots of black mold as well.

I've never had this happen before - sometimes I've had partial buckets stored for years, and it's still good when I'm ready to use it. And, I can't find any mention of this problem on this site or through any Google search either.

Has anyone else had this experience? Is there any way to prevent it? If I remove the mold, is it OK to use the rest of the bucket? Should I contact the manufacturer and ask them to compensate me for the bad batch?


02:19AM | 01/06/07
Member Since: 07/28/02
1358 lifetime posts
Do not use this joint compound unless you want mold on your walls they you may not ever get rid of, anyway joint compound is cheap. It is not the fault of the manufacturer as the mold spors got in while you were useing it and have been growing in that nice moist enviroment.


02:22PM | 01/21/07
Member Since: 01/20/07
1 lifetime posts
i bought this 5 gal bucket in june '06

used about 1/3 & replaced plastic cover to keep the air off the surface of the remainder.

opened it today 1/21/07 and found lots of kinda furry or fuzzy red and black dots both on top of the plastic sheet and also underneath. i've never seen this in other partial buckets that i've stored long term but i'd wager that the dots were mold

not one to waste materials, i tried to scrape off the top inch and found that the odd coloration seemd to go at least 4" deep into the mud.

not wanting to build mold into my house i've pitched the bucket and bought a new one.

i decided to search the net to see what i could find and found this forum as one of the few hits. wondering if anyone can shed light on why this happened to this bucket.

the last places this bucket was used were apparently mold free but you can't see what lurks at the microscopic level.

the last time i used the bucket was when it was about 100 days old and it seemed kinda dry on top so before i put the lid on the last time i sprinkled some good old city tap water on top to add a bit of moisture.

the bucket was stored wqith lid on tightly, inside the house, in a closed space.

this is remarkable to me because i've done all of this before and never had this experience.

i know that there are a lot of different variables, but anyone else have something to add or some scientific insight?


wait a little longer, try a little harder - success is imminent


04:58PM | 01/22/07
Member Since: 03/08/06
192 lifetime posts
I always treat my bucket of joint compound like Mayo, use a clean utensil to remove what you need and don't double dip. Work off of piece of cardboard or something, don't work right out of the bucket.

I use UPS priority boxes or Kitty litter lids.


03:32PM | 08/25/09
Member Since: 08/24/09
1 lifetime posts
I'm going to preface this by clearly acknowledging that I should have read this thread prior to my latest project.

Last week I began updating my son's bedroom which included skim-coating the walls with joint compound, and then sanding it smooth prior to Primer & Paint.

I had no idea that the joint compound had any mold in it and am now suffering with a mighty case of Mold Allergies: My upper body,my thighs, my calfs, my arms and my face look like a topographical map.

I've got welts inside my ear canals, under my chin, inside my mouth. . . on and on.

Had I chosen to work with a respirator - I probably would have avoided this uncomfortable malady.Whenever the swelling and the welts have gone down, I'll be off to H/D for a 3m Tyvek suit and a breathing respirator so that I can finish the work, and I'll be sure to kill all the mold that I can see.

Also, I've tossed the Joint Compound out to let it dry in the sun.

Take my advice. . . do your research and Do Know that Mold is no joking matter. One exposure ( for a person with acute Allergies ) can be a deadly situation. Fortunately I do not have such a reaction to mold, but I am also aware that the next exposure could be my last - if my system decides that it can't handle any more.


06:13PM | 08/27/09
Member Since: 07/28/02
1358 lifetime posts
I would remove that moldy joint compound from those walls if I was you. It will most likely cause you problems down the road.


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.


type the code from the image


Post_new_button or Login_button

Few projects are more fun than upcycling a vintage piece in a surprising way. Outfitted with a sink and a delicately tiled... Built on a rocky island in the Drina River, near the town of Bajina Basta, Serbia, this wooden house was cobbled together ... Large steel-framed windows flood the interior of this remodeled Michigan barn with daylight. The owners hired Northworks A... Edging formed with upside-down wine bottles is a refreshing change. Cleverly and artistically involving recycled materials... A Washington State couple called on BC&J Architects to transform their 400-square-foot boathouse into a hub for family bea... Similar to the elevated utensil concept, hanging your pots and pans from a ceiling-mounted rack keeps them nearby and easy... For windows, doors, and mirrors that could use a little definition, the Naples Etched Glass Border adds a decorative flora... The thyme growing between these stepping stones adds a heady fragrance to strolls along this lush, low-maintenance garden ... Decoupage is an easy way to add any paper design to your switch plate, whether it is wallpaper, scrapbook paper, book page... Twine lanterns add pops of crafty—but sophisticated—flair to any outdoor setting. Wrap glue-soaked twine around a balloon ... When securely fastened to a tree or the ceiling of a porch, a pallet and some cushioning make the ideal place to lounge. V... Reluctant to throw away any of those unidentified keys in your junk drawer? Hang them from a few chains attached to a simp... A stripped-down model, sans screened porch, starts out at $79,000. Add the porch, a heated floor for the bath, and all the... Salvaged boards in varying widths and colors make up the dramatic accent wall in this attic space. The high-gloss white of... This garden shed has been decked out to the nines. Designer Orla Kiely created the intimate home for a flower trade show, ...
Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon