Latest Discussions : Basement & Foundation

tubbyrana

04:46AM | 03/04/04
Member Since: 03/03/04
1 lifetime posts
I have an unfinished basement, and I am planning to have it finished as a DIY project.

I need info as to how to get started, which would mean installing the Frames as also considering the pipes, corners etc.

After the frame is in place, I would like to dry wall it.

plumber Tom

02:03PM | 03/05/04
Member Since: 05/10/03
801 lifetime posts
1st be sure you have no water problems. Then make sure the floor is level to start your sole plate (stud) Do a search on this topic. This is one of the most FAQ here. Do not attach any 2x4's or furring strips directly to the wall. 2x4 framing should be suitable to add insulation and additional electrical receptacles. If you need a powder room or even a full bath, post back and I can offer you some ideas, Tom


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button

Anonymous

Post new button or Login button
Register