Latest Discussions : Miscellaneous

BV015587

07:22PM | 01/27/18
Hi all;

I'm an apartment renter for 23 years in Manhattan who has permission to finish tearing down the old cement and plaster wall that had a pronounced bulge. The cement and plaster is about 1/2" thick and came off the wall easily around the 3 foot diameter bulge. Im a photographer and I could use this wall when painted as a cool background. I have access to a rotary hammer and chisel in order to get the rest of the plaster and cement off in quick fashion. The structure behind is a brick wall--mostly gray construction bricks. They are kind of ugly, so I plan to clean the bricks up, grind off excess cement and paint.

I was hoping for some advice when it comes to the border/corner areas of the wall. The corners of the wall have some mesh wire that the concrete adheres to, so I dont want to break off the cement in these areas--it would end up geting ugly.

I was thinking about putting up some kind of molding or corner bead that would add a nice finishing touch. Although some might say to leave it rough, I was thinking of a more "slick" look.

Open to suggestions and thanks in advance.

Gary
Brick wall


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button

Anonymous

Post new button or Login button
Register