Latest Discussions : Kitchen

BV020303

11:43AM | 09/06/19
We are replacing an old counter top on our kitchen island, with butcher block. I applied two coats of tung oil/citrus solvent to the side of the counter that will not be visible, then flipped the slab to begin working on the 'pretty' side. Then... I realized that we still will need to cut out the sink hole. Now I'm nervous about an increased fire risk from the wood having been penetrated (on one side) with the tung oil/citrus solvent. The saw blade creates a ton of heat as it is, and now the wood is imbued with oil/solvent. How can we safely cut the sink hole?

Hollyhock

11:45AM | 09/06/19
Member Since: 09/06/19
1 lifetime posts
I posted this original question before signing up... responding to my own question to ensure I receive notification of any responses that may come in. Thanks in advance for any advice!


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button

Anonymous

Post new button or Login button
Register