Latest Discussions : Tools & Workshop

Karl1234

02:30PM | 04/12/05
Member Since: 04/11/05
1 lifetime posts
Please help me if you can.

I have a ***** Craftsman 10" table saw (Model 101.02161) originally purchased about 1941 and is still in use until a tooth broke on the "Worm and Rack Gear" Part No. S8-43, which is composed of two gears attached to the Cradle used to raise and lower the 10 inch saw. Only the largest of the two gears has lost a couple of teeth.

I contacted the original ***** manufacturer (Clausing) and was told they no longer have parts.

I'm looking for a source for this part.

If anyone can help it would be most appreciated.

Thanks

Karl


BV012835

11:22AM | 09/11/16
I have both gears in good shape

BV012835

11:42AM | 09/11/16
Karl, You have the Part No. S8-43,is for the 8'' Craftsman Table Saw but say you have 101.02161 saw which is a 10'' saw. Those part no. are S10-43. I have 10'' parts see pics

drakebailey

07:52PM | 02/05/17
Member Since: 02/05/17
1 lifetime posts
I need a carriage assy for the tilt an up an down. I don't have a manual it is like 1986 model.


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button

Anonymous

Post new button or Login button
Register