Latest Discussions : Tools & Workshop

slider9499

03:09PM | 04/08/03
Member Since: 04/06/03
19 lifetime posts
I just bought my house here on Long Island back in July. The deck is 24' wide x 12' deep - all wood. It is not in that bad of shape but it could use a some help.

The questions that I am facing are as follows:

1. Cheapest Way - Clean and fix-up current deck and replacing bad slats, rails, balisters, etc. (Approximate cost $200-300)

2. Moderate Price - clean up slats, replace bad slats, steps and rails with Fiberon (approximate cost - $700-800)

3. Most Expensive - replace entire deck with Fiberon (approximately $2000 plus my own time or additional money if I hire labor)

Advice, suggestions comments are welcomed and appreciated.

- Ben

rpxlpx

05:30AM | 04/09/03
Member Since: 03/13/00
1674 lifetime posts
To me it depends on your budget. If you can readily afford to do the whole job with Fiberon, go for it.
One thing I would not do is to replace PART of the deck with Fiberon and leave part of it wood. That would create problems later when the rest of the wood needs replacement or treatment.
If you re-do only part of the deck, I would do it in the same material as the rest.


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button

Anonymous

Post new button or Login button
Register