Latest Discussions : Plumbing


04:03PM | 11/28/03
Member Since: 11/27/03
1 lifetime posts
I recently moved into a 40 year old home.
One of the toilets works just fine but the
water level in the bowl was pretty low. I
noticed the flush valve was blowing water
out the side and maybe there was not enough
water going down the tube to the bowl. I
replaced the valve and now plenty of water
is flowing into the bowl but it seems to all
run off and drop back to the same old level
as before.

Any ideas???

plumber Tom

05:12AM | 11/29/03
Member Since: 05/10/03
801 lifetime posts
Remove and Replace the Flapper. cost=$3.00


04:43PM | 11/29/03
Member Since: 09/10/03
67 lifetime posts
this commode may have a crack or pitted spot in the throat which you cannot see. when flushed, does the unit fill above the level in bowl then siphons back down to a level low in the throat. this would indicate a flaw.crack or pitted area in the throat of the bowl.

erik peterson

03:04AM | 12/03/03
Member Since: 06/23/03
223 lifetime posts
replace the toilet. erik


09:54PM | 02/28/04
Member Since: 02/28/04
14 lifetime posts
PlumbingSupply.US probably has the toilet part you need. They carry a full line of parts for just about every manufacturer and they are very nice people to deal with.

Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button


Post new button or Login button