Latest Discussions : Tools & Workshop

kchpitt1

11:48AM | 02/17/05
Member Since: 02/16/05
1 lifetime posts
Previous owner covered perfectly good hardwood floors with sheets of plywood and then wall-to-wall carpeting. Ply wood was nailed down, no problem pulling out nails, just a lot of work. Problem is he used liquid nails also to gule down plywood.

Pried up wood but left plenty of gule to get off floor, what's the best way to remove this glue, (its a give finish needs redone cuz of glue)

Piffin

03:39PM | 02/19/05
Member Since: 11/06/02
1278 lifetime posts
The samwe guy who does the sanding to refinish will take that off with a start of rougher grit sandpaper than normal

Excellence is its own reward!


joed

06:22AM | 02/21/05
Member Since: 09/17/02
524 lifetime posts
If there is still finish on the floor, paint stripper should work.

Heat gun also should work.


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button

Anonymous

Post new button or Login button
Register