Latest Discussions : Flooring & Stairs


08:02AM | 01/31/04
Member Since: 01/30/04
1 lifetime posts
My question is, What is the best way to finish the area where a wood floor will meet the metal track on a sliding glass door. I know to leave a 3/4 to 1/2 space between floor and wall, what about in front of the sliding glass door where it can not be covered with base and shoe? Also is it better to lay the wood 90 degrees to the door so end grain is to the metal? This project is over concrete and the wood is 3/4 Brazillian Cherry. If any one has any advise, Im all ears.


04:26PM | 01/31/04
Member Since: 01/26/03
542 lifetime posts
the space for expanstion is covered by a "baby threshold"...good luck


06:41AM | 02/02/04
Member Since: 08/27/03
254 lifetime posts
Some manufacturers also call it an end molding. Some installers may use carpet reducer, but you want something small.

Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button


Post new button or Login button