04:45AM | 10/07/04
Member Since: 06/26/04
30 lifetime posts
This is related to my question from yesterday regarding installing ceramic tile over oak flooring. Here is the rest of the story, as Paul harvey says. My front entrance hall is about one third slate and two thirds oak flooring. The slate is outdated, the oak is all marked up from having installed carpet end carpet runners over the years. Also, I removed a large landing from the bottom of the stairs and filled in with pieces of wood up to floor level. I used floor leveler to get it all levelled out prior to installation of laminate flooring, in a tile pattern. When I started to install the laminate flooring, my wife and I were both disappointed in how it looks and took it back to the store. We chose the laminate because we could install it over the old floor without digging out the slate or removing the oak. So now we are looking into either 3/4 inch oak wood and try to match the oak on the stairs, or ceramic tile. Either presents a worry about installation. The professionals all say to put backer board under the tile. I presume this means durock. I am reluctant to do that because it will raise the foor up by about an inch, what with the backer board, cement, and the tile. The backer board probably woudn't be necessary over the slate part, anyway, but needed to keep it all level. My question about the ceramic over the old oak is whether I can put a thin moisture barrier over it. As for the e 3/4 inch real wood I think it would look good if I can get it prefinished to match the oak on the stairs. Thats what they are doing in most of the new homes. My concern would be putting it over the slate. I could not nail it but maybe could pre-drill and use concrete screws. To keep it stable and prevent the screws from loosening up, I would use construction cement, i.e. liquid nail. Would I need a vapor barrier under the wood? If so, I would need to glue it down so the construction cement works. I have worked myself into a corner by trying to avoid removing the old flooring (slate especially) and starting from scratch. I think my preference would be to go with the 3/4 inch real oak flooring. Any ideas on which might have the better success?


11:06AM | 10/08/04
Member Since: 07/21/04
41 lifetime posts
the best success will be achieved by removing slate or tile or whatever.

Installing anything on top of tile will result in failure if anything happens to the original tile.

I know the hardwood will not work.

A floating hardwood however would work, but will not match the stairs.

*** "One floor expert to rule them all!" ***


04:45AM | 10/09/04
Member Since: 06/26/04
30 lifetime posts
Thanks, Floorwizard, for the reply. We chose laminate flooring in the first place so I would't have to dig out the slate. Looks like that may now be inevitable. Let me comment on the laminate flooring. We knew we could not go with a wood look laminate because it would lay in the entrance way with the grain at right angles to the grain of the oak steps, and of course it would never really match well. It would look like we unsuccessfully tied to match it up. So we went with a tile look laminate. That turned out unattractive for a number of reasons. The one foot squares on the on the faux tiles were out of proportion to the size of the hall. We need 8 inch squares. The laminate tile comes only in one foot sqares.The laminate did not have a smooth surface and did not reflect light. And it looked phony, which of course it is. And it was picked for us by the decorator from the store who came to our house! I hope others will read this post and see some of the pit falls of trying to do the flooring yourself. Another possible problem I see with installing real wood over the old oak is trying to drive the flooring nails through two layes of oak. That may be a problem. So, as you suggest, it looks like ripping up everything and starting from scratch is really the best way to go. Thanks again.
Click to reply button
Inspiration banner


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button


Post new button or Login button

To test the boundaries of small-footprint living, interior designer Jessica Helgerson moved her family to a 540-square-foo... Filling an underutilized area beneath the stairs is a smart way to save space. Doing so with a stash of wood, however, is ... The Audubon Society inspired wallpaper in this Adirondack-styled mudroom will get you in the outdoor mood. Grab your coat ... Chalkboard paint opens up endless possibilities for customizing your dresser time and time again. Use chalk to label the c... A fireplace in the bathroom creates the ultimate setting for relaxation. Homeowners often choose electric or gas over wood... This roomy boot tray made from punched metal stands up to all the elements. Station it in your mudroom or at your back doo... There’s nothing like a new set of cabinet hardware to refresh a room. The possibilities are endless: Go modern, rustic, or... FLOR tiles are an affordable way to customize a carpeted floor covering for any space. Make anything from runners to wall-... Chalkboard paint features prominently in this elegant yet unpretentious headboard design. Add a new message daily to reflec... Salvaged boards in varying widths and colors make up the dramatic accent wall in this attic space. The high-gloss white of... The indecisive homeowner need not fret over choosing one (or even two) cabinet colors. The kitchen cabinets in this artist... Incorporate nature into your lighting scheme by securing a dead tree in a concrete mold and draping your pendant lamp from... Simple and striking, a couple of pieces of "lovingly used" furniture creates a special kind of charm. A weathered chair fo... First dress up your metal shelves with a coat of paint in an accent color that complements your kitchen decor. Then arrang... Dark wood shelving and a matching upholstered bench keep this closet sleek and refined. The large window brightens the sub...
Follow banner a
Newsletter icon Flipboard glossy Facebook Twitter Pinterest Youtube Rss icon