COMMUNITY FORUM
- Forum >
- Electrical & Lighting >
- Replacing a Frigidaire Custom Imperial Flair Wall oven
We are replacing a 1950's something Frigidaire Custom Imperial Flair side by side double wall oven that will leave an opening in the wall approximately 40 1/8 " wide by 27 1/4 " high. Is there such a thing as a side by side double oven that can fit this hole. This was obviously a popular model. So what do people put in its place??? Help!
** We are replacing a 1950's Frigidaire Custom Imperial Flair side by side double wall oven **
Why, what's wrong with it?
** Is there such a thing as a side by side double oven that can fit this [approximately 40-1/8" wide] hole. **
I doubt you'll find anything to fit the space exactly. That is one of the main problems with replacing older built-in appliances.
The widest I've seen are ~36" models (see the following link). You'd then need to fill in the extra 2+" on each side with something (and maybe above or below).
- 36+ Inch Wall Ovens
LINK > http://tinyurl.com/6rbesx
JMO
Dan O.
www.Appliance411.com/parts/?ref411=Frigidaire+Oven
The Appliance Information Site
=D~~~~~~
Why, what's wrong with it?
** Is there such a thing as a side by side double oven that can fit this [approximately 40-1/8" wide] hole. **
I doubt you'll find anything to fit the space exactly. That is one of the main problems with replacing older built-in appliances.
The widest I've seen are ~36" models (see the following link). You'd then need to fill in the extra 2+" on each side with something (and maybe above or below).
- 36+ Inch Wall Ovens
LINK > http://tinyurl.com/6rbesx
JMO
Dan O.
www.Appliance411.com/parts/?ref411=Frigidaire+Oven
The Appliance Information Site
=D~~~~~~
