Latest Discussions : Windows & Doors


01:44PM | 12/03/14
Is there ANY way to clean out the straw type applicator thats used with this spray foam? I've been discarding the remainder in the can since the applicator is almost solid foam and i haven't discovered a suitable way to clean out the tube.


06:56PM | 12/04/14
1.Just slide a thin wire thru it while it is still wet and bend the wire end tight on itself. After the foam has hardened pull out the wire and old foam from exit end. 2.Blow out uncured foam into wrag from feed end with compressor. both have worked for me.


04:33PM | 12/05/14
Member Since: 10/01/14
14 lifetime posts
Logo small
I second the above suggestion. Using a wire while the foam is still wet usually works.

Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button


Post new button or Login button