Latest Discussions : Electrical & Lighting

jerseyshore

09:47AM | 01/02/03
Member Since: 01/01/03
2 lifetime posts
Hi I am moving a hanging ceiling fixture from one room to another. The power cord on the hanging lamp is one color, not black and white at the ends. I forgot to take note which cord went to black and which to white. One lead is ribbed and the other is smooth instead of being color coded. Is there a rule of thumbe as to which will go to white and which to black?

Thanks

gletiecq

06:42PM | 01/02/03
Member Since: 01/01/03
35 lifetime posts
Lamp cords typically have these types of cords, and if you look at one of those, the ribbed is on the "large" conductor of the plug, which would be the negative (or white) side. With an incandescent bulb, though, there shouldn't be any problem if they're reversed, since they work both ways. I wouldn't worry about it.

Greg

Joe Tedesco

07:01PM | 01/02/03
Member Since: 07/27/02
140 lifetime posts
The polarity is very important and must never be reversed!

[This message has been edited by Joe Tedesco (edited January 05, 2003).]

joed

02:50AM | 01/03/03
Member Since: 09/17/02
524 lifetime posts
Is lamp cord allowed to be wired direct into the box. It seems to me that this cord should have a plug on it and be plugged into a recepticle.

gletiecq

06:07AM | 01/04/03
Member Since: 01/01/03
35 lifetime posts
After thinking about this the other night, I realize that I was in error before. As another poster helpfully pointed out, polarity is indeed an issue. The way the bulb screws in, it first comes into contact with the neutral connector, and only when it's in all the way does it contact the "hot" contact at the base. This would ensure that if you touched the outer metal rim of the bulb as it was being screwed in, you'd only have contact with neutral. Reversing the polarity would indeed pose a hazard.

Figuring out which wire is absolutely the "hot" wire would be as simple as using a circuit tester and checking which wire is connected to the center contact in the receptacle. But if this is the case where it's an Ikea fixture or something intended to be plugged in and has been field retrofit to be hard wired, I'd suggest getting the correct hard-wired unit.



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button

Anonymous

Post new button or Login button
Register