Hi everyone,
I have a Kenmore electric range model: 911.46755
The clock/oven control/display does not work. It's completely blank. I've killed power to it and on powerup, nothing shows up. No error messages, nothing.
The top ranges all work, and the interior oven light works. Without the front panel, I can't bake anything.
I've called several local appliance repair places and the soonest any of them can come out is next week sometime :( Any idea what's wrong? and would this be something I can repair on my own, assuming I can get parts for it? Thanks.
** Kenmore electric range model: 911.46755 **
That looks to be only part of a model number, did you get it right off the appliance's model and serial number tag? That is the only reliable place it will be found.
I did find a listing for a model # 911.46755590
On the above range model I don't see anything which would stop the electronic control from functioning except it being defective. Basically, if power is getting to it, it should either light up or is defective and would likely need to be replaced. :(
You can see the replacement electronic control for the 911.46755590 range model at the following link:
LINK > http://www.appliance411.com/data.php?rc=254318
Dan O.
www.Appliance411.com/?ref411=Kenmore+Range
The Appliance Information Site
=D~~~~~~
That looks to be only part of a model number, did you get it right off the appliance's model and serial number tag? That is the only reliable place it will be found.
I did find a listing for a model # 911.46755590
On the above range model I don't see anything which would stop the electronic control from functioning except it being defective. Basically, if power is getting to it, it should either light up or is defective and would likely need to be replaced. :(
You can see the replacement electronic control for the 911.46755590 range model at the following link:
LINK > http://www.appliance411.com/data.php?rc=254318
Dan O.
www.Appliance411.com/?ref411=Kenmore+Range
The Appliance Information Site
=D~~~~~~
Thanks. I had forgotten the last two digits, which are 90, as you had presumed.
This is a stretch, but is there a schematic for this unit online somewhere that will show me how to get to the front panel? I looked around the front and was not able to see an easy way to open it. I hope I don't have to take the whole thing apart from the rear of the unit... As always, thanks for any help.
This is a stretch, but is there a schematic for this unit online somewhere that will show me how to get to the front panel? I looked around the front and was not able to see an easy way to open it. I hope I don't have to take the whole thing apart from the rear of the unit... As always, thanks for any help.
DanO: the link you provided doesn't seem to work :(
How would I search for this model on the Appliance411's website?
How would I search for this model on the Appliance411's website?
** is there a schematic for this unit online somewhere that will show me how to get to the front panel? **
There are exploded parts views available for Kenmore appliances at the S-ears web site at the following link. I don't know how much they'll help you to get *into* your appliance, that's not their purpose. The only thing with would be specific to *servicing* the appliance would be the "service manual" which would NOT be available on-line (if one was available for your model at all).
Kenmore 911.46755590 Exploded Parts Views
LINK > http://tinyurl.com/6wp59
** the link you provided doesn't seem to work **
Both links work for me today, maybe one or the other site was down temporarily? Try again.
** How would I search for this model on the Appliance411's website? **
Such a service is not available at my Appliance411 web site although there are links to the S-ears web site along with links to some other on-line part suppliers which offer a similar service for many of the other appliance brands, in the Appliance411 'Repair Parts' section.
Only S-ears has exploded view parts diagrams for Kenmore products AFAIK since Kenmore is their exclusive brand. Replacement parts however, may be available elsewhere if needed... once you look up the needed part number(s).
JFYI
Dan O.
www.Appliance411.com/?ref411=Kenmore+Range
The Appliance Information Site
=D~~~~~~
There are exploded parts views available for Kenmore appliances at the S-ears web site at the following link. I don't know how much they'll help you to get *into* your appliance, that's not their purpose. The only thing with would be specific to *servicing* the appliance would be the "service manual" which would NOT be available on-line (if one was available for your model at all).
Kenmore 911.46755590 Exploded Parts Views
LINK > http://tinyurl.com/6wp59
** the link you provided doesn't seem to work **
Both links work for me today, maybe one or the other site was down temporarily? Try again.
** How would I search for this model on the Appliance411's website? **
Such a service is not available at my Appliance411 web site although there are links to the S-ears web site along with links to some other on-line part suppliers which offer a similar service for many of the other appliance brands, in the Appliance411 'Repair Parts' section.
Only S-ears has exploded view parts diagrams for Kenmore products AFAIK since Kenmore is their exclusive brand. Replacement parts however, may be available elsewhere if needed... once you look up the needed part number(s).
JFYI
Dan O.
www.Appliance411.com/?ref411=Kenmore+Range
The Appliance Information Site
=D~~~~~~
Just wanted to wrap this up :)
I figured out how to take the range apart and get to the ERC. I was able to find a local source for the ERC and have replaced it. All is well and working now.
Before I went ahead and fixed it myself, I had a local appliance repair tech come out, just to confirm the failure and so I could get a price quote for the repair. Based on the quote, by doing this myself, I figured I saved about $200.
Thanks for all the help, DanO.
I figured out how to take the range apart and get to the ERC. I was able to find a local source for the ERC and have replaced it. All is well and working now.
Before I went ahead and fixed it myself, I had a local appliance repair tech come out, just to confirm the failure and so I could get a price quote for the repair. Based on the quote, by doing this myself, I figured I saved about $200.
Thanks for all the help, DanO.
** All is well and working now. **
Glad to hear it, thanks for the follow up.
Dan O.
www.Appliance411.com/?ref411=Kenmore+Range
The Appliance Information Site
=D~~~~~~
Glad to hear it, thanks for the follow up.
Dan O.
www.Appliance411.com/?ref411=Kenmore+Range
The Appliance Information Site
=D~~~~~~
I have a kenmore gas range with a similar problem - no display, yet gas burners and oven light are still working.
Could anyone explain what exactly was the fix for this problem? Replace the ERC? What is the ERC? Where could I obtain this part?
Could anyone explain what exactly was the fix for this problem? Replace the ERC? What is the ERC? Where could I obtain this part?
** Could anyone explain what exactly was the fix for this problem? Replace the ERC? **
In their case, yes.
** What is the ERC? **
ERC = Electronic Range Control. Ie. the clock/control computer.
** Where could I obtain this part? **
Either from S ears of another parts supplier which carries parts for the manufacturer which made the product for S ears.
S ears doesn't make anything them self, you can read about whom makes which Kenmore model at the following link:
Appliance411: Who Makes Kenmore Appliances?
LINK > http://tinyurl.com/6a53u
JFYI
Dan O.
www.Appliance411.com/?ref411=Kenmore+Range
The Appliance Information Site
=D~~~~~~
In their case, yes.
** What is the ERC? **
ERC = Electronic Range Control. Ie. the clock/control computer.
** Where could I obtain this part? **
Either from S ears of another parts supplier which carries parts for the manufacturer which made the product for S ears.
S ears doesn't make anything them self, you can read about whom makes which Kenmore model at the following link:
Appliance411: Who Makes Kenmore Appliances?
LINK > http://tinyurl.com/6a53u
JFYI
Dan O.
www.Appliance411.com/?ref411=Kenmore+Range
The Appliance Information Site
=D~~~~~~
My kenmore was great for years, and then as soon as it was out of warranty things started to go. I ended up having over $1,000 of fixes to it made, and had to put it all on my credit cards. I loved my kenmore appliances, but I'm not sure I would feel confident buying them again.
My Kenmore Gas range has been a constant source of malfunctioning from the very beginning. The display has never worked properly, and the Sears repair people have been out to repair it many times. It is now 3 years old and does not work at all. I will never buy a Kenmore product again.
I know this post is old, but if someone else stumbles across this I hope it helps!
If you "self-clean" your oven a lot, or use your oven on high temperatures a lot, over time the connections to the ERC tend to expand and contract causing a bad connection. Before you replace the ERC, simply try unplugging and re-plugging in all of the ERC connections with the power off! Has already worked twice for me.
*You must still have power at the main ERC plug for this to typically work.
Good luck!
If you "self-clean" your oven a lot, or use your oven on high temperatures a lot, over time the connections to the ERC tend to expand and contract causing a bad connection. Before you replace the ERC, simply try unplugging and re-plugging in all of the ERC connections with the power off! Has already worked twice for me.
*You must still have power at the main ERC plug for this to typically work.
Good luck!
Just purchased and had installed the subject range. Ever so often we hear a "clunk" noise coming from the range. We have no idea what it may be. Ghosts?
hi, i bought a kenmore electric stove and the display worked fine a couple days later it turned off...i can use the over it works fine when inset up for pre-heating it and the timer but when instop it the display turnes back off. what can it be? please help i hate to see my stove with the display off :(
sorry for the mispelled words....my oven works excellent but display turnes off after i use itbor stop timer when baking..what can it be????
I have a 790.74132310 and the oven stopped working after 15 months. After replacing the control module, that one lasted 80 days. Now the manufacturer claims they no longer make the part. Must be defective and Sears wants you to be the guinea pig at your expense. So much for a 700.00 oven.
Post a reply as Anonymous
Related Discussions
CRAFTMAN SNOWBLOWER 536.884800 OWNERS MANUAL
WERE CAN I A COPY OF A CRAFTSMAN SNOWBLOWER MODEL 536.884800
3
answers
12 days by BV020982
Cracks in block crawlspace...repair or not? (see pics)
Hello. I am planning on selling my house and I just discovered these cracks in the corner of the crawlspace. The inside of the insul...
3
answers12 days by BV020977
Cerfogres Ceramic Floor Tile Model: Palma Beige, Made in Spain
Hi! I am looking for replacement tiles for our house built in 1994 in Texas. Does anyone know where we can buy the following tile: ...
2
answers22 days by solizmonte
Smell outside from vent
I now have a Carrier Infinity 96, that was installed 8 years ago. I now have a smell of metal coming from the outside vent when fur...
1
answers4 days by Jordan Bronson
