Latest Discussions : Electrical & Lighting


12:44PM | 05/03/05
Member Since: 05/02/05
1 lifetime posts
Okay I came here to find the problem but no answer. I had the same problem and ***** came out to fix it. This is the problem!!!!! Remove the screws on the upper rear of the dryer and remove the top of the dryer not the back. Look down and on the left you will see a computer panel with a black wire. The problem is that the wire is not pushed down far enough to the board. It should lock in. You will know this is the issue when you see the control panel light up. Make sure the wire is secure it should not just be able to pull off. Hope this helped.


03:19AM | 05/04/05
Member Since: 07/23/04
491 lifetime posts

This was an warranty issue?

How long until the problem occured?


Appliance Repair Aid


06:26PM | 04/17/17
This worked like a charm, was about to give up and checked the black wire you talked about and it worked. Thanks for the info, all of this work just because sorry *** workmanship.


01:38AM | 08/23/17
Worked for me too except it was ribbon of white wires with black plug not making contact. Pushed it in tighter and control panel lit up. Thanks for the info.


07:32PM | 01/23/18
Do you unplug the dryer before messing with the wire?


12:10PM | 09/03/18
Thank you so much for this!!!! I got my dryer working again!!!!!


07:30PM | 09/13/18
Had the same issue, thanks for posting


09:45AM | 04/01/19
WP dryer showed F01, replaced the control board now the front panel will not light, the interior drum light goes on so I know there is power. I put the old control board back in and the same F01 appears. Could the new board be damaged or is there a reset button? Thanks


06:22PM | 09/13/19
I believe my problem is the moisture sensor it has to resisters that have no polarity resistance and that control the heat so without them it’s open circuit and shut motherboard down that’s what I believe

Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button


Post new button or Login button