Latest Discussions : Tools & Workshop


05:19PM | 03/02/04
Member Since: 03/01/04
3 lifetime posts
I am going to remove the carpet from my stairs and I would like to stain them to match my laminate flooring. There are some holes in the treads from the tack strip that held the carpet in place. If I fill these with wood filler will they stain at all or will they look like they were filled with putty? Does anyone have any suggestions on how to do this to minimize the appearance of these holes?

doug seibert

10:50AM | 03/03/04
Member Since: 08/10/02
842 lifetime posts
What 'flavor' is the new flooring.......?

And the old stair treads are.........?


10:51AM | 03/03/04
Member Since: 07/02/03
30 lifetime posts
Don't use wood filler. It never stains the same colors as the wood. What you need to no is after staining and applying the poly, use a wood putty that is color matched to your stain. You may not even have to fill all of the holes with putty. I recently did my stairs and used a medium oak stain. Most of the nail holes visually disappeared. Just my 2000 cents.


03:50PM | 03/03/04
Member Since: 03/01/04
3 lifetime posts
Thanks for the suggestion. The wood laminate we are using is beech, and I have no idea what type of wood the stairs are-I assume some kind of hardwood but I could be wrong. After closer inspection I think that I may just be able to sand the steps and apply a poly, the colour seems pretty close to the same tone as the flooring.

Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button


Post new button or Login button