Latest Discussions : Lawn & Garden

rogery

05:32AM | 09/19/04
Member Since: 06/16/04
5 lifetime posts
I am in the process of putting up a wooden fence (standard 6 foot high, three 8 foot sections), books call for the post to be in the ground ½ of the fence height. Lucky me, the soil is real rocky and has remnants of old concrete from previous fences. Digging with gas driven auger was an ordeal, and I got the holes 2 ft deep. If I poured concrete around all posts, not just the end ones, could I get away with just 2 ft holes? Thanks.

treebeard

02:41AM | 09/24/04
Member Since: 01/14/03
264 lifetime posts
If your fence is 6 foot high post and rail, perhaps you might get away with it. But if it's standard 6 foot high stockade, then it essentially becomes a sail in a breeze or wind. It wouldn't be long before a storm knocked it over.


kadmilrampton

06:59AM | 07/01/13
Member Since: 07/01/13
1 lifetime posts
Small.92y15h0cj873
See, as you depicted that there is a concrete on the ground, So don't think that it would be for you to get 2ft holes but even if you tried to do so then it may happen that you may damage your fence?? Isn't??
The better solution to this can be you call some repairer they are actual experts they can give you a complete and beautiful look like I had installed near to my used office furniture and looks like this


Fence


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button

Anonymous

Post new button or Login button
Register