The expansion valve on my AC is creating a large amount of condensation to the point the water is dripping down the side of the furnance and into the filter. (I am not sure if the valve is in fact an expansion valve, but it is similar in size and shape as the expansion valve on my 68 Camaro.) At any rate, the valve and the approx 7/8" diameter copper pipe connected to the valve is covered in foam insulation but apparently it has no effect on sweating. I was told that the valve will sweat if the freon level is low. Does this sound like the cause of my issue?
can you explain more in detail on what the liquid line problem can be (i.e., kinks in the line, causing flow problems). Also what is a TEV? thanks for your reply
Are the small capillary tubes on your TXV exposed outside the coil cabinet? They will sweat natrually if not housed within the A-coil box. They are the very small spider like tubes on the outlet side of the expansion valve. If the drip seems to be comming from inside, than that's a different story.
- 15 Old House Features We Shouldn't Abandon
- 17 Tiny Bathrooms We Love
- 16 Designs for a Low-Cost DIY Coffee Table
- Insanely Easy 60-Minute Home Improvements
- 12 Sheds You Could Live (or Work) In
- Assembly Required: 15 DIY Kit Homes
- 30 Things Every Adult Should Know How to Do
- 10 Surprisingly Simple Woodworking Projects
- 7 Surprising Other Uses for Mayonnaise
- 9 Ways to Make Your TV Look at Home
- 9 Totally Amazing Mobile Home Makeovers
- 8 Cleaning Mistakes Everyone Makes
- 10 Insanely Creative Shelves You Can DIY
- 10 Bargain Organizers for a Tidy Garage
- 7 Easy Budget-Friendly Backyard Makeovers
- 9 Backyard Fire Pits You Can Afford
- 10 Things You Didn't Know Windex Can Do
- Watch These 10 Home Trends Take Off in 2015
- Surprisingly Simple Woodworking Projects
- 16 Garden Borders You Can Make—Easily!