Latest Discussions : Flooring & Stairs

BV005210

11:07AM | 08/03/14
I ripped up wallpaper and used joint compound to texture the walls...unfortunately it got on my laninate floors... they are the wood like ones with the grains in them..the compound is in between the little grooves... what should I do?How do I remove this?

David, Moderator

10:51PM | 08/03/14
Member Since: 11/15/13
264 lifetime posts
Hi there
I am not sure if the compound is in the beveled seams or in the indentations of the grain.

Anyhow, here are some suggestions.

Big globs can be removed by scraping using a wooden shim or a plastic putty knife.If they don't pop off, dampen them with a wet rag and scrape off a little at a time. Go over with the damp rag often if needed.
Don't use a metal putty knife, these will scratch the surface.

Drywall is water solvable so small areas can be removed using a damp rag. Rinse the rag often to avoid smears.

Be careful when removing compound in the beveled seams. Remove the excess and finish up by rubbing lightly with a damp rag.
Hope this helps
Thanks
David

ronefereck

07:47AM | 08/06/14
Member Since: 07/22/14
3 lifetime posts
It was really nice for sharing such a nice information about some points for the joint compound off laminate floors.

Aged natural stone Tiles



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button

Anonymous

Post new button or Login button
Register