Latest Discussions : Tools & Workshop

BV016053

10:15AM | 04/02/18
I have a large shed with a loft. I added insulation and drywall to the lower portion, and installed a small AC/Heater to make it usable as a workshop in the winter and summer months. After doing so, however, all my tools began to rust. I put a humidity meter in and it does have very high humidity (not sure what it was before). I had a ridge vent cut in the top to improve ventilation, but still have the problem. Any suggestions on what I can do, other than just running a dehumidifier 24/7. It just sits on cinder blocks, so I have wondered if the moisture is coming through the floor. Thanks.


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button

Anonymous

Post new button or Login button
Register