09:23AM | 04/15/04
Member Since: 04/14/04
1 lifetime posts
I need 4 drive belts for this Craftsman knife sharpener.

Do you know where I could get them?

***** is out of stock - How nice!

It is item number 9 in the chart below - taken from Seas/Craftsman site.


Part Number: Part Description: Model Number:

1907109 POWER BELT 319190710

Part Listing within Model HOME SHARPENER - 319190710 for part description: BELT

Part Description Part

Number Product

Section Quantity


: 4 drive belts for this Craftsman knife sharpener


09:33AM | 11/16/09
Member Since: 11/15/09
2 lifetime posts
One of the two belts was intact in my sharpener.

I measured it and counted the teeth and believe I have now ordered the replacement drive belt for the sears craftman sharpener 319.190710 or 919071 or 319190710 seems all are the numbers i could find.

the part # i ordered is a 100XL037


timing belt with 50 teeth 3/8 inches wide 1/5". remember to order 2 of them.

I hope once I receive it I will remember to post a confirmation on this site that it was correct. if i do not please remind me to if you need definitive.


04:11AM | 01/25/10
Member Since: 01/24/10
1 lifetime posts
I was wondering if the timing belt you ordered worked in the Sears sharpener?


07:07PM | 05/02/10
Member Since: 11/15/09
2 lifetime posts
part number 100XL037 1/5 pitch (XL) timing belt

you will need 2 of them, price was $4.21 a belt

very easy to change out 1 on a scale of 10 for difficulty. you have to know how to operate a screwdriver.

shipping was $6.68

phone is 951-677-7424 in california


07:48PM | 05/11/11
Member Since: 05/11/11
1 lifetime posts
Talked to Joe at Rainbow Precision Products, Inc, he was very helpful.
Got the belt ordered, the price has gone up to $6.97 each plus shipping.
Thank you for helping me find the belt.


02:34PM | 01/03/13
Gates Part Number: 92571304


04:33PM | 12/31/13
I just got mine cheaper at
The cost per belt was $2.99 and shipping was USPS $3.08. The other places above were over $11.00 to mail. That is a rip-off. You *know* it don't cost $11.00 to ship some belts thru the mail. It was the same belt they were going to ship!
I make my money work for me!


06:07PM | 04/07/14
I just heard that Rainbow Precision Products now offers shipping via USPS. Give them a try if you need to replace the worn out belt.


02:47PM | 09/04/14
I found that an Electrolux Upright vacuum uses a compatible belt. It is a bit more narrow but otherwise it fits.


11:36AM | 09/05/14
Sorry, but the above vacuum clean belt does NOT fit! The cogs are slightly different.
Click to reply button Inspiration banner


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button


Post new button or Login button

Follow banner a
Newsletter icon Flipboard glossy Facebook Twitter Pinterest Youtube Rss icon