COMMUNITY FORUM

Forum >
Tools & Workshop >
Craftsman 10 in.radial arm saw owners manual available

07:41AM | 07/11/07

Member Since: 05/09/07
7 lifetime posts

Craftsman 10 in.radial arm saw owners manual available

For fellow Woodworkers needing manuals for Craftsman 10 in.radial arm saws. I and others have sent pdf copies for the following owners manuals to this website for your access.

http://www.owwm.com/MfgIndex/Publications.asp?ID=222

The above website has these owners manual:

Model 103.29310 9-inch Radial Saw.

Model No. 113.29410 Craftsman Accra-Arm 10 inch Radial Saw.

Model 113.29440 Craftsman Accra-Arm 10" Radial Arm Saw

Model 113.23100 10" Radial Arm Saw

Model 113.19760 10" Radial Saw

Model 901.23181 Radial Arm Saw Instructions and Parts

Model 113.199200 Radial Arm Saw

Model 113.197110 10-inch Radial Arm Saw

Craftsman 10" Radial Arm Saw Field Service Manual

Model No. 113.29003 Craftsman Accra-Arm 10 inch Radial Saw.

Model No. 113.29411 Craftsman Accra-Arm 10 inch Radial Saw.

Model 113.29401 10" Radial Arm Saw

good luck,

Walt

kbeaud79

08:52AM | 08/24/07

Member Since: 08/23/07
1 lifetime posts

I just inherited my dad's 10" Craftsman Radial Arm Saw which was never opened until yesterday - even though it was purchased and remained in the box for more than 14 years! Unfortunately it only came with a FRENCH owners manual!!! Does anyone have a copy or know where I can get one? I've contacted Sears as well as the OWMM site listed here but still no luck. I've found similar models online but not this particular one. I really don't want to have to have this copy translated as it's more than 88 pgs in length!

Hope someone can help!!

ps... also found out that it was involved in a recall from several years ago. I've ordered the new parts - hope they can be supplied!

hobodewey

11:00AM | 09/18/08

Member Since: 09/17/08
3 lifetime posts

The link posted for the manuels does not work

doug seibert

12:06PM | 09/18/08

Member Since: 08/10/02
842 lifetime posts

OldWoodWorkingMachines recently changed servers/code/computers.......it's still right there......just moved around

Go to OWWM and select Craftsman and then publications and then locate yours........

try the link....scroll down to locate your #....

http://www.owwm.com/mfgIndex/detail.aspx?id=222&tab=3

"......measure Once.....cut Twice....

throw that one away and cut a new one...."

BV015919

11:24AM | 03/14/18

I HAVE A CRAFTSMAN 10 " RADIAL ARM SAW MODEL 113-23100. MY PROBLEM IS THAT I CANNOT SWING THE ARM LEFT AND RIGHT AFTER I RELEASE THE LOCK HANDLE AT THE END OF THE ARM. PLEASE HELP. CHET SENDS