Craftsman 4 1/8" Jointer/Planer Mod. No. 149.236223

Charlie,

I just purchased a used planer like this, and did not get the manual. If you get a positive response to this, I would appreciate a copy of the manual, either as an attachment, or however you could provide it.

Harold

hestark@juno.com

I have the maual in an Adobe file, but can't seem to get it loaded in this response. Send me an email address an I'll sent it to you.

Charlie

Charlie,

My 3-mail address is: hestark@juno.com

Do you know how old the planer is? I had assumed when I bought it that the manual was available from Sears, but since it isn't, I wonder if it may be quite old.

Thank you for your help!

Harold

Charlie,

would you please e-mail me a copy of this manual as well to ericd@ksdot.org?

Thanks

I'd like to have this manual also. Please email to address in my profile. Thanks

David9105

Doid you ever get a copy of the manual?

If you would you please mail me a copy?

My address is schuh@yahoo.com

Thanks

Charlie, I shore would like to get a copy of the owners manual, can you help me out?

scottpear619@cox.net

Scott

If you got a copy of the manual, I would to get one also. If you would email me brcptrsn@usa.net I would greatly appreciate it.

Bruce

Bruce

I am looking for a manual for acraftsman jointer/planer model#149.236223

Did you ever get the manual for craftsman model #149.236223 jointer/planer. If so can you email it to me thanks

Dear Charlie,

My email address is: tiavic@gmail.com

I will appreciate if you send me the manual.

Thank you very much?

Vitoria

I have a copy of the manual. email me and I'll make a copy and send it to you

doever@mac.com

richard doerr

Hi,

I just picked up this model at a garage sale. Kind of rusty but I think it will clean up.

I can't get the manual on the sears site. If you could email me a copy, I would be very grateful! My email is timkeel@gmail.com.

Thanks!

I just got this joiner as a gift today and would greatly appreciate a copy of the owners manual

thanks

edd

I have unsuccessful in sending a copy of the manual in a message. If you'd send your name and mailing address, I'll print it out and mail it to you on Monday.

Charlie

edd watson

900 pawnee dr.

elizabethtown, ky 42701

looking forward to receiving copy

thank you

edd

Edd, it'll be in the amil on 7/2. Would you let me know when you get it.

Charlie

Edd, the manual is in the mail. The Post Office said you should receive it not later than Thursday.

Good Luck!

Charlie

Edd, send me an email address, I might be able to send the manual in a pdf file, if you want me to try it. I can't attachor copy it to the website, as I've tried that.

Charlie

HI CHARLIE

EMAIL ADDRES IS EDDDBLDW@AOL.COM

i APPPRECIATE YOUR HELP VERY MUCH...WILL LET YOU KNOW WHEN IT GETS HERE...THANKS AGAIN

EDD

received the maunual charlie...many thanks

edd

Does anyone have any information on sharpening or replacing blades on the 4.25 Craftsman Jointer?

The adjustment knob at the rear will not work for some reason. Nice little jointer, but the blades need a sharpen, or replacement. Veritas makes a jointer blade sharpener I saw online.

Also, I need a manual,sent one email out tonight.

Keep making sawdust!

=)

Finally, have the manual in a pdf file, sent me an email address and I'll email it to you. Charlie

Charlie,

Can you email me a copy of that manual too? You're a lifesaver!

fmahon2@yahoo.com

I tried to send email to your address and got error message both times. Please confirm.

Charlie

Thanks, I bought a 5.1/2 inch and it has a manual. My problem is the back handle on the 4.5 will not adjust the throat, and I have know idea how to fix it.

Would you pleas send me a copy of the manual for the Craftsman 4 1/8 inch jointer ?

Thank you

Jim

email address jim_d16@hotmail.comwould you please send me the manual for the $ 1/8 jointer ?

Thanks

Jim White

Can you send me the pdf of the manual for the 4 1/4 Sears jointer, also....

cstew-at-storysmith.net

(sub the @ sign appropriately)

Thanks.

Chuck Stewart

Charlie502, I too would like you to email me a copy of the owners manual for the craftsman jointer model 149.236223. I would appreciate it very much. Thanks, John xngh2mw@emerytelcom.net

Hi Charlie,

Could you email me the manual.

rwalker9@juno.com

Thanks

Bob

Hi Charlie,

Could you also email me the manual?

troganig@yahoo.com

Thanks for the assistance,

Greg

hi we sure could use a copy of the manual also thanks very much lhaeffelin@gmail.com

Hi Charlie-I was wondering if I could also get a copy of the manual? My e-mail is hintzgreg@hotmail.com Thanks for any help

hi,

i was reading post and saw that you have owners manuel in pdf format. My brother just gave me one and he didn't have owners manuel anymore if you could email it to me I would really apprerciate it. Thank you very much.

My email address is dakotablue@tds.net

I recently brought back a Craftsman Model 149.236223 Joiner/Planer from my mother's house in Michigan. Does anyone have the PDF manual for this tool. If so, could I please have a copy emailed to me at kevjaxfl@bellsouth.net. Thank you.

KevJaxFL

Hi Charlie. My name is Bill and I just am doing a search for this manual. Can you send me a pdf file for this? Thanks for your help.

William Beriou

Can someone out there E-Mail me a copy of the owners manual for Craftman Model # 149.236223. I sure would appreciate it.

Juan A. Sierra e-mail:jas72756@yahoo.com

Picked one of these (149.236223) up, but no manual. It just needs a little TLC. What is the general opinion (pros/cons) of this tool? I would greatly appreciate it if someone would email me a manual for it.

Thanks,

Ray

rcsec@hotmail.com

I purchased a used jointer/planer model 149.236222 and could really use a copy of the manual. Please e-mail me at info@trinitywoodcraftdesigns.com.

Thanks & In the Will of God,

DeKajun

http://www.owwm.com/home.aspx Try this site and surf around. Detective work. Bill.

William Beriou

http://www.owwm.com/home.aspx Try this site and surf around. Like a detective. Use your model no. to hunt down the company and year your Craftsman was made. Craftsman had quite a few companies make their stuff. You may have to settle for a owners manual that is close but not exactly like your machine. I found enough info on a Craftsman pre WW2 4 1/8" jointer to tear it apart and restore it. I took a chance on and won it in an auction for 6 bucks, completely covered in rust but intact. Its built like a tank and works GREAT now. It also looks very cool I think. Mine was made by King-Sealy in 1939. Good luck, Bill.

William Beriou

Thanks a lot, I was able to find the manual and diagram. I will overhaul and hopefully it will run like a charm. Thanks for your advise

In the Will of God - DeKajun

Has anyone found blades for this model?

I am looking for a manual for a craftsman jointer/planer model#149.236223

can anyone help?

Hi Charlie

Could I get that PDF from you as well?

my e-mail is opus5552000@yahoo.com

Thanks

Chris

The blades aren't available from Sears, nor anywhere else I can find. Harbor Freight might have had something that might work a few years ago, but not anymore. And they don't look like they'd be easy to sharpen. So if anyone has a source please post, otherwise my tool is worthless.

The blades are the same as used on a name brand jointer that I can't remember at this moment. I'll post it if I remember, but I know you'll have no problem getting them. I was going to replace mine so I found out quite a while back what it would take but I decided I would have them sharpened instead. Sorry, not much help.

William Beriou

I think Grizzly tools has blades that will

fit, but I haven't ordered them yet. AMT made their jointer as well.

charlie, if you could email me manual for planer i would really appreicate, email address is dakotablue@tds.net. thanks in advance

Richard

could you please send me a copy of your pdf manual. Many many thanks

Ian McFall

imcfall@sbcglobal.net

I was actually in a Sears store over the past summer, looking at some of their power tools. They do carry a 4 1/8 inch planer and the replacement blades look identical to the ones for this model. I compared my old blade to the ones still in the package and I can't tell the difference. I didn't buy them because I'm not sure if I need to replace them yet. I beleive they were around $12.00. If you search for them online, the picture might show the blade with 4 holes. The actual blades that I found do only have 3. Matter of fact, here's the link: http://www.sears.com/shc/s/p_10153_12605_00922993000P?keyword=4+1/8+inch+jointer

Also, I am still in need of the manual if anyone happens to run across one. Thanks.

If anyone has the manual, please contact me at: kevjaxfl@bellsouth.net

Thanks

I ordered the blades #H3874 from Grizzly, perfect fit.

Thanks for the tip, but the blades you speak of don't look anything like the blades on model 149.236222, which are big honkin' things with a built-in curve to them, not flat blades like most modern jointers.

In any case, this jointer is going in my next yard sale. Maybe I can get back the $5 I paid for it (in a yard sale a couple of years ago).

I'd sure appreciate if someone could send me manual for that planer.

lmeade@lanset.com

trangler:

If you look closer you might find that the blades are between those curved parts. - I just got one at yard sale and thought that was the blades at first but thought they looked too odd. I turned the thing a bit and saw where the blades are screwed on.

I have 149.236221 sitting in my garage. The knives are dinged up badly (it was salvaged). I don't know if the Grizzly blades fit, but I just went to Harbor Freight and they have a 4 1/8" jointer there with item# 65673. I borrowed one of the stores allen wrench sets and took of the jointer's knives off... a perfect match (I had one of my 149.236221 knives with me). Same length, same hole pattern for the blade. There are actually two extra slot holes in these HF knives that are used for alignment purposes (see part# 61 in the manual linked below(. The knife 'sits' on the head of that allen screw as you put on the blade clamp. I like that setup actually better than the Craftsman. However, that's about all that looks better... flimsy fence. Infeed and outfeed tables look ok, but overall the machine is much lighter weight than the craftsman.

Anyway, the knives are part #58 (bottom two pages) in the HF manual located here:

http://www.harborfreight.com/manuals/65000-65999/65673.pdf

You can't order it online, I asked the HF parts people at 800-444-3353. They come as a pair (IIRC) and they are $13.63. Oh, and these blades are edged on both sides... when one side gets dull or dinged, you can flip it around and use the other one.

BTW, you CAN get order the manual from Sears for around $3 and change.

Hope that helps!

Paul

I just called the Harbor Freight phone # and the blades are special order: 6 to 8 weeks delivery time. IF they have them in the warehouse they will ship them sooner but there's no guarantee.

I'm wondering if these might work?

http://www.sears.com/shc/s/p_10153_12605_00917323000P?mv=rr#descriptionAnchor

Paul

The blades seem to be about 4 1/8" long, 1/16" thick, 11/16 wide (as-is), single bladed (again, as-is, I don't know the original condition), with three elongated slots approx 1 11/16" on center and 17/64" wide. I haven't mic'd the knife, these are just rough measurements. I have attached a pic.

HF is discontinuing this and the blades are no longer available. Have to wait for the next cheap skinny blade jointer.

Charlie,

Would appreciate your emailing me a copy of the above referenced manual.

Email address: domar@cybercrossings.com

Thank you

Doug

Hi Charlie. Can I get a pdf copy of the instruction manual for the Craftsman 4-1/8" jointer, Model 149. Thanks very much.

Mark

For all who are still looking for blades for this unit......go to Sears. I just purchased 3 sets from my local store. They are marketed under p/n 922993 4 1/8 jointer blades. These are a perfect match to the ones in my machine...same length, thickness, width and hole pattern. And they work perfectly.Apparently made for Sear latest model.

Strange when calling Sears parts, they don't know that this item will fit the older jointers.

Hope this helps.

Doug

A manual for jointer 149.236221 is available from sears for $3.11 plus shipping: www.searspartsdirect.com.

After some intensive research and obtaining this manual from ebay......the picture is the same as the 149.236223.

Comparing the parts breakdown on the sears web site with the 149.236223, the only difference appears to be a different numbering system for the parts.

Hope this helps all who are still seeking a manual for the 149.236223.

Doug

fast eddie needs a copy of this manual if anybody would be kind enough to share--am grateful for any help!!

If you still have a PDF available for this planer please email me at hawkslure3@yahoo.com

Thanks a million

I am in need of this manual too. If anyone can send me a copy to kevjaxfl@bellsouth.net , I would greatly appreciate it. Thanks.

Charlie, I too would like to receive a .pdf copy of the owner's manual. My e-mail address is jmlowejr@comcast.net.

thanks.

Charlie I am new to the site and was searching for a manual for my model 149.236223. I purchased it used and of course no manual came with it, if you still have a PDF copy I would appreciate a copy of it. My email address is thopson_sj@att.net

Charlie; I have "searched the world over..." for the 2362223 manual with no luck. Could you please send me your pdf copy? You would be a life saver.
JamesOscarJ@yahoo.com. Thanks.

Just my 2 cents worth... it's ridiculous that Sears doesn't have this manual / parts list online free like most manufacturers of power tools... even for very, very old and obsolete equipment. This is another example of why Sears is likely to go out of business during this decade. They used to be tops in tools... I try to avoid them now.

could someone send a copy of the sears jointer planer 4 1/8 owners maual no. 149.236223? I shure would apreceate it.

Thanks

Nancyb25@mchsi.com

I have a Sears Jointer/Planer model# 149.236221 and contacted Sears to be informed that they do NOT carry replacement blades for that Jointer/Planer. I did some checking and have ordered and received the exact blades for that Jointer/Planer from Sears. They think that they do not have the blades but they do under the following info from my Sears order:
Item Number 00921791000
BLADES.21762.REPLACE
Cost = $14.24

I am still in need of a manual for this model (149.236223)of jointer/planer if any one is able to help me out. My email is kevjaxfl@bellsouth.net. Thanks.

Need a manual. roperdoug@bellsouth.net

Need a manual can't find one to download.

Hi everyone,

My neighbor just gave me the planar with the instructional manual. I will be willing to scan it and send it to anyone if they can just get me blades. I saw the info from the previous posts, sears.com isn't pulling up anything. I guess I have to call them?

benjamin.mordecai@gmail.com

help me get blades.

Anybody find blades for this white4 elephant yet? I need a set.

I also purchased this model recently and would like a pdf copy of the manual. If you still have it available I would be greatly appreciative to you. Please advise, thank you. Email: luigil@sbcglobal.net
Lou

I just purchased a 149.236223 also that's in great shape. Would be grateful if I could also get a PDF of the manual. Let me know, email: gordynagel@q.com

God Bless
Gordy

Please send me owners manual also charlie

I need blades