Latest Discussions : Tools & Workshop

jay988

06:31AM | 10/02/03
Member Since: 10/01/03
1 lifetime posts
I'm planning on finishing a room (baseboard, chair/crown molding, door/closet trim). Will a Brad nailer be sufficient to finish this type of work or is a Finish nailer required?

What would be typical uses for each?

Any input would be appreciated. Thanks.

toolcen2

06:08PM | 10/02/03
Member Since: 09/10/03
67 lifetime posts
THESE ARE BASICALLY 2 OF THE SAME. THE BRAD NAILER USES 5/8 TO 1 1/4 IN 18 GA.BRADS AND COST APROX 89.95. THE FINISH NAILER USES 16 GA BRADS 5/8 TO 2 INCH AND COST APROX 189.95. FOR BASEBOARDS, CASING, WINDOW MULL, AND TRIMS, I WOULD SUGGEST THE 16 GA NAILER. FOR MORE INFO, SEE MY WEBSITE WWW.TOOL-CENTRAL.COM


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button

Anonymous

Post new button or Login button
Register