Latest Discussions : Painting

dmchr3

06:57PM | 02/17/03
Member Since: 12/28/02
6 lifetime posts
We are painting all the rooms in our "new" house (built in 1979) and all the wood work -mouldings, door frames, doors, staircase edges, etc are the typical 1980 dark stained wood with probably some sort of a light varnish. The house we're moving from (1980) had the same darn woodwork in it, which we ended up pulling out and replacing it all (including the doors) because we never tried painting it because we thought it wouldn't work or look good.
So the question is can we quickly and easily paint a light color (like white/off-white) over the woodwork with out sanding it or applying a liquid sandpaper? What about using some of these "gripper" primers? Would you sand some of the larger areas like the wood by the stairs, the door frames or doors? We really don't want to have to spend lots of time sanding nor do we want to have to replace all the mouldings again.

5slb6

01:34PM | 02/18/03
Member Since: 07/28/02
1356 lifetime posts
The Zinsser company says that with their primers all you need to do is wipe the woodwork with paint thinner/mineral spirits and then follow with an ammonia & water wash.I would go with their BIN primer as if you knots in the wood it will hold them back the best. The finish paint to use will be a acrylic latex semi-gloss and you will most likely need 2 coats of finish paint over the primer if the woodwork is as dark as it sounds.


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button

Anonymous

Post new button or Login button
Register