Latest Discussions : Electrical & Lighting

BV018267

12:06AM | 12/26/18
I've installed a new fan with remote. Everything looks good. but I've a requirement which seems to be either not working or the remote is not programmed to work that way.
Here is the case:
When i switch ON wall switch fan and light would not start. But I can start those with remote and stop those with remote. If I switch OFF wall switch while both the fan and light are ON, both fan and light are switched OFF.
If switch ON wall switch again then, light turns ON but not fan.
All is good up to this point.

However if I switch OFF wall switch, while fan and light are OFF(both are turned OFF by remote) and then switch ON the wall control again I expect the light turn ON. (irrespective of the mode in which remote is).

In other words, Every time I turn ON wall control I expect light to be turned ON. (During night if remote is not accessible we should be able to turn-on light irrespective of remote's state). Remember when wall switch is ON remote should work as usual.


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button

Anonymous

Post new button or Login button
Register